Jiuyuan this year Q1 after tax EPS 1.15 yuan Q2 is expected to reach 1.7 yuan

Jiuyuan's Q1 revenue in 2012 was NT$629 million. It is estimated that Q1 gross margin can be increased to 37.62% from 33.15% in the previous quarter, and net profit after tax is RMB 140 million. Calculated after fully diluted share capital of RMB 1.225 billion, after tax EPS 1.15 yuan.

Looking forward to this year's Q2, the OEM demand for LED cuts continues to increase, and the current test capacity of the IC test foundry business has reached full load. In addition, orders for passive yuan construction equipment have also been warmed up, and Q2 revenue is estimated to reach 843 million yuan. New Taiwan dollar, gross profit margin also continued to increase with the operation, estimated to increase to 41.08%; after-tax net profit of 208 million yuan, after-tax EPS 1.70 yuan.

Jiuyuan includes ICs and LEDs in the cutting and inspection business, of which LEDs account for 70~80%. At present, the production capacity has been increased to 3.5 billion through the modification of equipment (from one arm to two arms); however, due to the follow-up development of LED customers, the focus will be on the mainland, and some cutting and picking machines may cooperate with customers. Use in the mainland.

Xiamen currently has a production capacity of 300 million units, which is expected to expand to 600 million units by June 2012 and will be expanded to 1 billion units by the end of 2012. The customers of the Xiamen plant are still dominated by Taiwan-funded LED factories.

The Strain Clamp is primarily used to fix the conductor, ground wire terminals on tension towers of overhead lines, distribution lines and distribution equipments in substations, power plants. It also can fix the guy wire terminals on poles. Moreover, it bears all the tension of conductors, ground wires and lightning conductors.

According to its configuration and installation means, the strain clamp can be divided into compression type, bolt type and wedge type. Generally, the compression type includes hydraulic compression type and explosive compression type.

Generally, malleable cast iron, steel, and aluminum alloy are used as it's materials.     

All the ferrous metal should be hot-dip galvanized.

Strain Clamp

Strain Clamp

Strain Clamp,Bolt Type Strain Clamp,Wedge Type Strain Clamp,Wedge Clamp,Insulation Strain Clamp,Compression Type Strain Clamp

Jiangsu Chuandu Electrical Technology Co.,Ltd. , http://www.cdepf.com