Clean Aunt was laid off Pusannik P2S sweeper evaluation

After the IT168 evaluation just moved to the new office, the boss made a decision to save the budget by cutting off the clean aunt of the office. At the beginning, everyone was still very active. After all, they thought about how many bonuses they would like to pay at the end of the year. However, when everyone is busy, the cleaning must be pulled down. The dust on the floor is light dancing. At this time, the editorial department got the Pusannic P2S sweeping robot. Oh, it's just a matter of evaluating and cleaning the office.


Clean Aunt was laid off Pusannik P2S sweeper evaluation

For Pusnian P2S's challenge, cleaning aunts is not convincing. So here we take a look and see if the Pusannik P2S can meet our daily cleaning needs.


Pusannik P2S

First look at the Pusannik P2S equipment, Pusanike P2S with a drag function, so more than a sweeping robot sinks, towels. In order to protect the edge of the machine, manufacturers also equipped with protective tape.


Pusannik P2S

The first equipment to be installed before the start of work, the Pusannik P2S uses two brushes to work, through the built-in fan of the fuselage to suck dust and debris into the dust box.


Pusannik P2S

   In order to prevent the robot from falling, the Pusannik P2S has 5 drop sensors on the bottom and detects that the height difference of more than 8CM will automatically turn.


Pusannik P2S

Never afraid on the desktop Pusannik P2S will fall.


Pusannik P2S

In order to achieve the mopping function, the Pusannik P2S is equipped with a dedicated sink. It is also very easy to use, just open the lid and fill it directly.


Pusannik P2S

The cloth in the sink gradually absorbs moisture and transmits the water to the towel on the bottom. It takes a certain amount of time to be used for the first time, and it can be considered that a small partner who can't wait for it can be used for direct wringing.


Pusannik P2S

   Possannik P2S is fully equipped . The method of first sucking and dragging simulates the daily cleaning process of the floor, allowing unwashed dust to collect on the rag.


Pusannik P2S

Although it is a damp cloth, the ground plunged by Pusannik P2S will not leave obvious water spots. It will feel watery when it is touched, because a thin layer will soon evaporate and it is more suitable for wood floors.


Pusannik P2S

   Pusangnik P2S provides an anti-dumping dust box. To prevent secondary pollution, in addition to the HEPA filter on the air outlet, there is a layer of filter after opening the box. The entire dust box is washable and has a long service life.


Pusannik P2S


Pusannik P2S


Pusannik P2S


Pusannik P2S

   The Pusannik P2S is equipped with an infrared remote control, eliminating the user's fatigue when bending over. The key is that this remote control can manually adjust the route (the fan stops working at this time), which means that in addition to having a sweeping robot, we also have a remote control toy car.


Pusannik P2S

For the Pusannik P2S body equipped with a WIFI camera, you can instantly become a remote control car with a first vision.


Pusannik P2S

Well, the next step is actual combat. In order to use more features, I lost the simple remote control, intended to operate through the mobile phone APP.


Pusannik P2S sweeping robot evaluation: actual combat

Pusannik P2S can use JD.com’s mobile phone and WIFI link. In fact, JD Micro is still very interesting. All smart home appliances purchased in Jingdong can be managed through this APP. The process of adding is also relatively simple. Use the APP to scan the two-dimensional code of the body and press the key in the “edge” mode for 5 seconds.


Pusannik P2S

Compared with the remote control APP, it provides a more intuitive operation interface, including the working status and power of the Pangsang P2S. The power of the fan and the area to be cleaned can also be set.


Pusannik P2S

Pusannik P2S adopts a wireless carrier indoor positioning system. During the work process, the indoor map of the user's home is constructed in the system, which means that the more efficient the machine itself will be. In addition Pu Sang Nike P2S in front of the fuselage equipped with point Zhenshi infrared detectors, with HSIR + multi-point matrix intelligent planning system can avoid the obstacle of more than planning a more efficient cleaning path.


Pusannik P2S

Although the average family would not have a slope, in order to test the momentum of the P2S, the author gave him a climbing test. It can be seen that even on the slope, the Pusannik P2S can still perform the task of cleaning.


Pusannik P2S

Pu Sang Nike P2S configuration mentioned earlier point Zhenshi infrared detectors, such as an obstacle in the face of some of the cabinets, walls, and the brakes will automatically change the cleaning direction.


Pusannik P2S

After we had drummed down, we let the Pusannik P2S run on its own. The greatest sensation in the cleaning process was that it was very strong. When standing by, the air that came out of the outlet was obviously a little louder. After we set up the automatic mode, the Pusannik P2S worked in an I-shaped position.


Pusannik P2S

In terms of cleaning effect, in addition to the paper ball that we throw on the ground, the Pusannik P2S has a good adsorption effect on hair and dust. Do not know where to inhale a plastic film, it can be seen Pusangnik P2S suction is strong enough. But then again, the volume of the dust box can be bigger


Pusannik P2S

Edit Comment: Despite the fact that the work noise is a bit large, the Pusannik P2S has strong suction but it is an indisputable fact. With the cleaning strategy of first sucking and dragging, Pusannik P2S is undoubtedly full of confidence in the cleaning ability. However, taking into account the quiet problem, Pusannik P2S is more suitable to work after the family goes out. Anyway, there is an APP manager and you can check the working status at any time. In addition , the Pusannik P2S also has overload protection. In the event of a winding situation, it will automatically shut down to ensure safety.


Pusannik P2S

Three-axis DSLR Stabilizer

Three-axis DSLR stabilizer is composed of pan axis, rolling axis and tilt-axis. With a gyro-stabilized gimbal system, it keeps stabilized or steerable horizon with automatic calibration to give you an unprecedented smooth shooting experience.
professtional gimbal stabilizer
The camera stabilizer is very professional for DSLR photographer, the device has heading cruise, normal holding position, inverted position, and single-handed side position modes.

Wewow focusing on handheld stabilizer is a technology company which does R & D independently. With Wenpod series product released, the company achieved the industry's praise and quickly became the leader of the smart stabilizer industry.

Our service

1. Reply to you within 24 hours.

2. Already sample: within 1-2days.

3. Shipping date: within 24 hours once get the payment.

4. 12 months warranty.

5. After-sales service, solve within 3 working dates.
If you have any questions, please contact with us directly.
Wewow appreciates domestic and international business relationship!

Three-Axis DSLR Stabilizer,Popular Three-Axis DSLR Stabilizer,Professional Three-Axis DSLR Stabilizer,Handheld Three-Axis DSLR Stabilizer

GUANGZHOU WEWOW ELECTRONIC CO., LTD. , https://www.stabilizers.pl