Abdominal armor 2 mechanical keyboard start unpacking

Recently I found myself using a mechanical keyboard that was a little offensive. The feel of the Q key becomes different. The warranty period expires. Still send it back to repair? Think about using a lot of money back and forth. Have to wait. Bitter B, I still scored in DOTA2's fish pond. Or buy it. If you can change your own axis, then save a lot of trouble. There are also many keyboards with interchangeable shafts on the market. Wolf faction, E element these. Finally, start with the belly of the spirit armor 2. However, the purse has become thin. My heart is bleeding

Unpacking (pseudo):

The LOGO and the snake's totem are printed on the black corrugated paper. However, this color does not look obvious. The back of the light gray printed features. In fact, it's no surprise to be used to seeing it.

The side is my customized information. ><

You can also vaguely see the white-gray subject. There is a thick sponge next to it. You can feel at ease before you arrive

Accessories: There is a manual, a warranty. A key puller. There is also an adjustable hand rest. Four color shafts. The main thing is still a shaft puller. So if something is okay, you can toss yourself and replace the shaft.

White ash looks simple

104 basic layout of the keyboard. Use a suspended design. Irregular frame design looks OK. Compared to the keyboard used before ~~

Metal panel. It feels very comfortable. It's just a look. The border is sprayed with letters. More points off. It doesn't look so monotonous.

White ABS keycap. Two-color injection molding. Feeling touch is OK. White keycaps still have time to deal with them.

After a long time with oil, there will still be. Transparent characters can increase light transmission. The nozzle left during the injection molding is not too bad for the appearance and light transmission. It is still acceptable.

Black axis. Large keys use balance bars. Easy to trigger. However, there is no sense of solidness in the previous keyboard. The shaft shell is transparent. This light pollution is not too light.

Adjustable hand rest. But only a small piece. Playing games can be comfortable. Personal typing feels awkward when typing. Still have to adapt first.

There are four standard non-slip feet and two legs behind the keyboard. The middle is the nameplate. Simple

The braided wire is used normally. Gold-plated USB interface also shielded ring -W-

The instructions can be used to adjust lighting effects. RGB is more complicated and can only slowly look ~

When the light is strong, the lighting effect is not so obvious. The color is a little lighter.

Turn off the lights. Ready to shoot, I feel pretty good. The light is relatively transparent. The color is also uniform. That is where the large keys are less transparent ~

Let's try again changing the shaft. Haven't tried it before. There are four axis bodies to give you experience first. This is fooling you into the pit

Compare yourself with the instruction manual. It does not seem difficult ~

It is easier to pull the key cap and change the cap. The key is still as fast as usual.

Then use the puller to align the axis body position. However, the shaft puller is a bit big and it must be careful.

When changing the shaft, you should pay attention to the pins of the shaft. Otherwise it is easy to bend. Replace the shaft. Press the keycap on it. You can be quicker if you are skilled.

Summary: The design is simple. The white keycap really has to take care of it. Black shaft playing games is better. There is a hand rest on the left hand. Not so tired. It's still a bit laborious to type. Lights can also be relatively transparent. Easy to change axis. But be aware of the pin. The axis body can be solved by yourself. Simple and convenient. You can run without it so much trouble.

advantage:

1. The lighting effect is good. Transparency is relatively strong.

2. Can change the shaft. When the shaft body has problems, you can repair it yourself

3. Good hand when playing games

Disadvantages:

1. The white keycap is easy to get dirty

2. The delivery shaft puller is a bit large.

3 hand care is only suitable for playing games

Glass Fiber Series Wire

The insulation material uses 160 pieces /250 pieces non-alkali yarn glass fiber yarn, which is characterized by thin insulation layer, light weight and protective effect on inner insulation.Impregnating varnish used modified epoxy paint, epoxy, conforms to the ROHS certification, with excellent electrical properties and high mechanical and damp and hot resistance, suitable for ac, dc motor, synchronous generator, dry type transformer and high temperature electric appliance coil and winding, the high voltage ac motor, large dc motor, large wind turbines, glass envelope envelope particularly suited to 10 kv transformer and large and medium-sized high-voltage motor winding.

Glass Fiber Copper Wire

Copper Flat Wire,Glass Fiber Series Wire,Double Glass-Fiber Copper Flat Wire,Fiberglass Copper Wire For Motor

HENAN HUAYANG ELECTRICAL TECHNOLOGY GROUP CO.,LTD , https://www.huaonwire.com