ZigBee terminal product introduction parameters

Sensors and Detectors

The sensors and detectors in the ZigBee network are the same as the sensors and detectors described in previous chapters. The difference is that the information seen, heard, and heard is converted into ZigBee signals and sent to the ZigBee gateway. Nanjing Wulian Sensing Technology Co., Ltd. developed smart home sensors and detectors mainly include temperature and humidity sensors, wireless leak sensors, wireless parking sensors, gas leak detectors, wireless smoke detectors, glass break detectors, air Quality detectors, PM2.5 detectors, wireless ambient light detectors, wireless noise detectors, infrared intrusion detectors, wireless door and window magnetic detectors and wireless curtain detectors. The readers can view the technical parameters and performance of these sensors and detectors on the Internet. The following only describes a wireless infrared intrusion detector.

The SR-CWD-IRD-1 wireless infrared intrusion detector is a new type of product based on the ZigBee/SmartRoom protocol. In the effective working range of infrared intrusion detectors, if a person breaks in illegally, the infrared of the human body is detected by the sensor in real time, and Send a wireless alarm signal to the wireless gateway for monitoring tasks.

This product is widely used, in addition to common smart home systems, can also be used in monitoring systems, smart hospitals, smart hotels, smart buildings and smart farming systems.

Features are as follows: support ZigBee / SmartRoom HA protocol; installation is more convenient, supports a variety of installation methods: a new design, closer to home life; detection range is wider, the greatest degree of protection of home security; can be used in conjunction with the relevant alarm equipment, Remote monitoring via mobile smart terminals.

The main technical parameters are as follows

1) Communication method : IEEE802.15.4 (ZigBee/SmartRoom).

2) Communication distance: 100m (under visual conditions).

3) Detection area : 3m (under visible conditions).

4) Detection speed : 0.2-3.5m/s.

5) Power requirements : 1 CR2 battery (3V).

6) Operating temperature : -10 to +45°C.

7) Package size : 90mmX 70mmX 40mm.

8) Weight: 105g.

9) Net weight : 50g.