10kw Kp1005.17f. 3 Servo Motor for Injection Molding Machine

Model NO.: Kp1005.17f. 3
Starting Mode: Variable Frequency Starting
Certification: ISO9001, CCC, Ce
Brand: Keputek
Motor: Servo Motor
Usage: Injection Molding Machine Servo Motor
Modle: Kp1005.17f. 3
Same as: U1005f17.3
Nominal Torque: 57nm
Nominal Speed: 1700rpm
Nominal Power: 10kw
for Oil Pump: 32cc Oil Pump for Injection Molding Machine
Trademark: Keputek
Transport Package: Wooden Box
Specification: CE
Origin: Ningbo, China
HS Code: 8413190000
Motor Identifier: Kp1005.17f. 3
Nominal torque T100: 57 N.M
Nominal speed nN: 1700 RPM
Nominal power Pn: 10 KW

Maximum speed Nmax: 2150 RPM

Rotor inertia Jm: 6.8kg m2 10-3
Motor insulation: F grade
Winding insulation: H grade
Cooling: Air cooling
Waterproof: IP54
Threshold of built-in PTC: 130 ºC
Pole number: PN=8
Winding connection: Y type
Torque constant Kt: 2.81 Nm/A
Winding resistance Rw: 0.673Ohm
Winding inductance Lw: 8.584mH
Nominal voltage Vn: 380 Vrms
Back Electromotive Force @ 1000RPM V1000: 171 Vrms
Nominal current In: 20.4 Arms
Working frequency Fn: 113 Hz
 
Motor suspended in horizontal position in free still air, ambient temperature of 20 ºC
Motor flanged connection in horizontal position, ambient temperature of 20 ºC
With interference coupling and infinite load inertia applied in the middle of the shaft extension
Standard type
Typical value at tolerance of ±10%

10kw Kp1005.17f. 3 Servo Motor for Injection Molding Machine



 

510 Cartridge

·Basic precautions

Do not put expensive oil into low-quality cartridges to avoid wastage. Most pre-filled oil cartridges have the so-called 510 thread. The oil cartridge screws onto a rechargeable battery. Some of these batteries have buttons and some heat up automatically when you pump the oil. Some batteries have multiple temperature settings and some heat up to a preset temperature; these features need to be known in advance.

·Cleaning notes

Use a suitable cleaning tool to clean them, such as activated charcoal or dried tea leaves in a used pipe to absorb the oil. It is important not to use alcohol or other boiling water to clean the pipe, and to wait until it has cooled down completely before cleaning. Otherwise, the hot stem will come into contact with the watery liquid and cause the mouthpiece tenon to loosen, thus shortening the life of the 510 cartridges.

This is what you should be aware of when using 510 cartridges. At the same time, when using 510 cartridges, there are still some vaping tips, for example, when using them, be careful not to suck too hard, will not produce smoke. When you inhale too hard, the smoke is sucked directly into your mouth and not atomized by the atomizer, so gently inhaling is more powerful and gives you a better vaping experience.

510 Cartridge Oem,Leakproof 510 Cartridge,510 Battery And Cartridges Oem,510 Cartridge

Shenzhen MASON VAP Technology Co., Ltd. , https://www.cbdvapefactory.com